Water Chiller Installation

Hengde Company, a renowned leader in the industrial refrigeration sector, offers top - notch Industrial Chillers that are crucial for various industrial processes. To ensure the optimal performance and long - term reliability of these chillers, proper installation is of utmost importance. Before commencing the installation, the following preparations are essential.   Pre - installation Preparations 1. The chiller unit should be installed in a dedicated machine room. Measures must be taken to exhaust the heat generated during the chiller unit's operation from the machine room. The ventilation volume should be sufficient to maintain the room temperature below 40°C.   2. The chiller unit should be installed on a non - deformable rigid base or a concrete foundation. This foundation should have a flat surface and be capable of bearing the weight of the chiller unit during operation.   3. There should be drainage measures such as drainage ditches around the chiller unit's foundation with sufficient discharge capacity. This is to facilitate the discharge of water in the system during seasonal shutdowns or maintenance.   4. The machine room should have enough space for the installation, maintenance, and repair of the chiller unit. There should be sufficient space for tube extraction. Also, no pipelines or wire ducts should be laid above the compressor.   5. To ensure the normal operation of electrical components, do not install the chiller unit in places with dust, dirt, corrosive fumes, or high humidity. If such conditions exist, they must be rectified.   Installation Requirements 1. For water-cooled chillers, select a cooling tower that matches the refrigeration capacity of the chiller. When installing the piping of the chiller, install it according to the diameter of the cooling water pipe. Do not reduce the size of the cooling water pipe, as this will cause high - pressure overload, affect the refrigeration effect, and increase power consumption.   2. For air-cooled chillers, they must be installed in a space more than 1m away from the wall to avoid poor heat dissipation, which can lead to high - pressure overload, affect the refrigeration effect, and increase power consumption.   Notes 1. For power load and grounding parts, please construct according to relevant regulations! 2. The chilled water pipes of newly installed chillers must be insulated!   Hengde Company is committed to providing not only high quality Industrial Chillers but also comprehensive technical support and after - sales services. If you encounter any problems during the installation or operation of the chiller, our professional team is always ready to assist you. We aim to ensure that your chiller operates smoothly and efficiently, contributing to the success of your industrial operations.   Choose Hengde, Choose Perfect Chillers!