Oil Mould Temperature Controller Machine

Hengde Company, with a long standing reputation in the industrial temperature control sector, has been dedicated to delivering state of the art and dependable temperature control equipment. Our oil type mould temperature controller machines are engineered to meet the diverse and exacting demands of various industries, offering unrivaled performance and durability. Here, we present a comprehensive guide to the installation steps of our oil type mold temperature controller (Oil MTC or Oil Heater) machines, ensuring a seamless setup process for your production operations.   Installation Steps 1. Connect the Mold and Mold Temperature Controller Machine: First, connect the mold outlet to the hot oil inlet of the oil - type temperature machine. Make sure the connection is precise to avoid any oil leakage. Use appropriate fittings and ensure a tight seal.Then, connect the mold inlet to the hot oil outlet of the machine. This step is crucial for establishing the hot oil circulation loop between the mold and the temperature machine.   Handle Unused Inlets and Outlets: For other unused hot oil inlets and outlets, block them with plugs to prevent any foreign matter from entering. As an alternative, you can also block them with bellows. This not only maintains the integrity of the system but also ensures safety during operation.   2. Oil Filling Process: When filling oil, closely monitor the liquid level display tube on the side of the oil tank. This provides a clear indication of the oil volume. During the first pump cycle, pay extra attention to the oil level in the tank.After starting the pump, immediately check whether the oil in the tank is sufficient. Simultaneously, observe the pressure gauge. Once the desired pressure is reached, the optimal oil level should be at the 1/3 position of the display tube. This ensures efficient operation and prevents potential malfunctions due to incorrect oil levels.   3. Check Pipe Joints: Thoroughly confirm whether the joints of the bellows and water pipes are tightened. Loose joints can lead to oil leakage or water seepage, which may cause damage to the equipment and affect the production process.   4. Power Connection: Connect the power cord of the machine to your company's switch box and fasten it securely. If the machine does not come with a power cord, then connect your company's power cord to the air switch box in the electrical control box of the oil type mould temperature controller machine.It is of utmost importance to connect the ground wire. This is a critical safety measure that protects the equipment and personnel from potential electrical hazards.   By following these detailed installation steps, you can ensure the proper functioning of your Hengde oil type mould temperature controller machine. Hengde Company is committed to providing not only high quality products but also comprehensive after sales support. If you encounter any issues during the installation or operation, our professional technical team is always ready to assist you. We aim to be your long term partner in achieving efficient and reliable temperature controlled production processes.   Choose Hengde, Choose Perfect Mold Temperature Controller!