China Industrial Chiller

Hengde Company, a well - known enterprise in the refrigeration equipment R & D and production industry, has been committed to providing efficient and stable industrial chiller products for various fields for many years. With advanced technology and strict quality control, Hengde chillers have a good reputation in the market and are widely used in many scenarios such as industrial production and scientific research experiments, providing reliable refrigeration support for customers' production and operation. However, to ensure the safe and efficient operation of the industrial chiller, correct operation and maintenance are of utmost importance. The following are the precautions and warnings for Hengde chillers.   I. Operating Precautions for Chillers 1. The chilled water pump of the chiller must not operate when there is no water in the water tank. 2. Try to avoid continuous switching of the operation switch. 3. When the chilled water temperature of the chiller reaches the set temperature, the compressor will automatically stop running. This is a normal phenomenon. 4. The temperature switch should be set above 5°C to prevent the evaporator from freezing (except for low - temperature units). 5.To ensure the best cooling effect and keep the chiller in optimal condition, regularly clean the condenser, evaporator, and water filter of the industrial chiller.   II. Electrical Precautions 1. Only after the unit is shut down and the power is turned off can the industrial chiller be cleaned. Otherwise, there may be a risk of electric shock or injury. 2. Do not directly rinse the chiller with water, and do not perform maintenance when the chiller is in operation. 3. Do not use steel wire or copper wire to replace the circuit breaker. Use the correct - specification fuse to avoid damaging the industrial chiller. 4. If a fault alarm occurs, immediately shut down the unit. Restart it only after the fault is eliminated, or promptly notify the maintenance personnel for handling. Continuing to use the chiller in this situation may cause electric shock or fire accidents. 5. Warranty work can only be carried out by professionals. Before removing the electrical wiring device, all power sources must be cut off.   III. Warnings 1. Never twist or pull the wires of the controller to avoid damaging the controller and causing malfunctions. 2. Never wipe the controller with benzene, thinners, or chemicals. Otherwise, it may cause discoloration or component malfunctions. To clean it, first soak a cloth in water containing a neutral detergent, wring out the water, wipe the controller, and then dry it with a dry cloth. 3. Never apply excessive force to the operation screen or connection parts to avoid color changes.   Hengde Company always pays attention to the customer - use experience. In addition to providing high - quality chiller products, we also have a professional after - sales team to provide customers with all - round technical support and maintenance guidance. If you have any questions or need help during the use of Hengde chillers, please feel free to contact us (www.hengdechiller.com). We will wholeheartedly serve you to ensure that your equipment is always in the best operating condition.   Choose Hengde, Choose Perfect Chillers!