540kw 150ton Air Cooled Screw Chiller System HC-540AD

Hengde's 180 hp air-cooled screw chiller, which can be referred to as either a 540 kw hp air-cooled screw chiller or a 150 ton air-cooled screw chiller, features two compressors. It is extensively employed in industries like electronics, chemicals, plastics and rubber, die-casting, surface treatment, textiles, petroleum, marine, and concrete mixing.

The Features of Hengde 540 kw Air Cooled Screw Chiller:

• Double Compressors;
• The imported semi-hermetic twin-screw compressor is employed. In comparison with the traditional compound compressor, it shows high efficiency, quiet operation mode, simple operation process and long service period;
• Utilize world-famous brand refrigeration parts to ensure the quality and stable operation of the unit;
• Both the evaporator and condenser are equipped with up-to-date high-efficiency threaded copper heat exchange tubes with a high heat transfer coefficient. At the same time, evaporation inside the tube and condensation outside the tube possess high heat transfer efficiency, guaranteeing the unit's good refrigeration performance;
• The unit is controlled through a microcomputer programmable controller. The segmented energy regulation system of the compressor can accurately and on time control the fit between cooling capacity and cooling load;
• Ensure that the unit operates in the most efficient way and with the lowest energy consumption to achieve dependable energy-saving operation.

Model And Technical Parameter：

Notes：

If this model is not suitable for your existing products, please inform us of the following information, and we can accurately recommend a suitable model to you:

1. Application industry;

2. Cooling capacity (if you don't know the specific cooling capacity, please kindly provide the machine flow, inlet and outlet temperature of the equipment);

3. Ambient temperature;

4. Refrigerant type, R22, R134a, R407c or other, please specify;

5. Voltage;

6. Any other special requirements, such as pump flow, pressure requirements, explosion-proof requirements, etc.

Our Advantages: 

1 - The Factory We Own

• Specializing in water mold temperature controller and oil mold temperature controller design, production and sales more than 10 years, with area of 15000sqm,over 150 employees.
• The engineering team has an average of 15 years of experience in industrial refrigeration. The sales team has an average of 8 years of experience in the field..
• We always provide customized solutions according to specific requirements. Our quality control process consists of three steps: incoming quality control, process quality control, and outgoing quality control. All products come with a 12-month warranty. During the warranty period, if any problem is caused by defects in the mold temperature controller itself, we will offer services until the problem is resolved.

2 - The Partners we cooperate.

3 - The Glowing Reviews from Numerous Customers. 

4 - The Abundant Industry Cases We Present.