360kw 100ton Twin-Compressor Air Cooled Screw Chiller Manufacturer HC-360AD

Hengde 120 hp air cooled screw chiller, also known as 360 kw air cooled screw chiller or 100 ton air cooled screw chiller, finds its place in chemicals, plastics and rubber, electronics, die-casting, concrete mixing, textiles, petroleum, marine, and surface treatment industries.

The Features of Hengde 120 HP Air Cooled Screw Chiller:

• Double Compressors;
• The imported semi-hermetic twin-screw compressor is utilized. As opposed to the traditional compound compressor, it presents high efficiency, low noise operation, easy to operate and long service duration;
• A microcomputer programmable controller is in charge of the unit. The segmented energy regulation system of the compressor can accurately and promptly control the matching of cooling capacity to cooling load;
• The evaporator and condenser are furnished with the latest high-efficiency threaded copper heat exchange tubes having high heat transfer efficiency. At the same time, evaporation inside the tube and condensation outside the tube ensure good heat transfer efficiency, ensuring the unit's fine refrigeration performance;
• The stand-alone refrigeration circuit can be maintained and fixed separately without having an influence on the use of the whole device;
• Ensure that the unit has the highest running efficiency and the lowest energy use, and carry out reliable energy-saving operation.

Model And Technical Parameter：

Notes：

If this model is not suitable for your existing products, please inform us of the following information, and we can accurately recommend a suitable model to you:

1. Application industry;

2. Cooling capacity (if you don't know the specific cooling capacity, please kindly provide the machine flow, inlet and outlet temperature of the equipment);

3. Ambient temperature;

4. Refrigerant type, R22, R134a, R407c or other, please specify;

5. Voltage;

6. Any other special requirements, such as pump flow, pressure requirements, explosion-proof requirements, etc.

Our Advantages: 

1 - The Factory We Own

• Specializing in water mold temperature controller and oil mold temperature controller design, production and sales more than 10 years, with area of 15000sqm,over 150 employees.
• The engineering team has an average of 15 years of experience in industrial refrigeration. The sales team has an average of 8 years of experience in the field..
• We always provide customized solutions according to specific requirements. Our quality control process consists of three steps: incoming quality control, process quality control, and outgoing quality control. All products come with a 12-month warranty. During the warranty period, if any problem is caused by defects in the mold temperature controller itself, we will offer services until the problem is resolved.

2 - The Partners we cooperate.

3 - The Glowing Reviews from Numerous Customers. 

4 - The Abundant Industry Cases We Present.