300℃ 24kw 36kw Hot Oil Fluid Mould Temperature Controller Unit Supplier HEOT-30

Oil mold temperature controller supplier is a mold temperature controller with heat conducting oil as its medium. It can be called an oil heating device, an oil temperature heating implement or an oil circulation temperature control mechanism. It is widely utilized in industries such as plastic forming, rubber, chemical production, electronics, foodstuff and medicine.

Hengde oil mold temperature controller suppliers are classified based on temperature into 200℃ oil mold temperature controllers and 300℃ oil mold temperature controllers. The HEOT-30 model is an oil mold temperature controller supplier with a temperature control capability of 300℃ (572℉). The heating power is 24kw or 36kw. It has a wide temperature control span and good thermal stability. It has low demands on the pressure resistance of pipelines. It can reduce the percentage of defective products, produce high quality products in one operation and improve production and quality.

Hengde 24kw / 36kw Oil Mould Temperature Controller Features：

1. Blow-return oil function (optionally available for purchase);

2. Automatic air discharge at startup, heating power switching feature;

3. Instantaneous-cooling start-up mode;

4. Pressure relief BY-PASS for hot oil circuit;

5. 304 stainless steel seamless pipeline reduces pipe groups and rust stains;

6. The isolated electric control container extends the usage life of electrical devices;

7. Perfect safety safeguards; Professional people are not needed for fault showing, repair and maintenance.

Model And Technical Parameter：

Our Advantages: 

1 - The Factory We Own

• Specializing in water mold temperature controller and oil mold temperature controller design, production and sales more than 10 years, with area of 15000sqm,over 150 employees.
• The engineering team has an average of 15 years of experience in industrial refrigeration. The sales team has an average of 8 years of experience in the field..
• We always provide customized solutions according to specific requirements. Our quality control process consists of three steps: incoming quality control, process quality control, and outgoing quality control. All products come with a 12-month warranty. During the warranty period, if any problem is caused by defects in the mold temperature controller itself, we will offer services until the problem is resolved.

2 - The Partners we cooperate.

3 - The Glowing Reviews from Numerous Customers. 

4 - The Abundant Industry Cases We Present.